LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2013 >> Elantra L4-1.8L >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Start / Stop Module >> Service and Repair >> Charging System >> Repair Procedures
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures





Removal

[200W]
1. Disconnect the battery negative (-) cable.
2. Remove the crash pad lower panel.

3. Disconnect the DC/DC converter connector (A).




4. Remove the DC/DC converter (A).




[400W]
1. Disconnect the battery negative (-) cable.
2. Remove the crash pad lower panel.

3. Disconnect the oil pump unit connector (A) and the DC/DC converter connector (B).
4. Remove the oil pump unit (C) and the DC/DC converter (D).






Installation

1. Install in the reverse order of removal.

NOTE:
If the battery negative (-) cable is reconnected after disconnecting, the ISG function does not operates until the system is stabilized for about 4 hours.

scientia non olet · About LEMON Manuals