LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2013 >> Elantra SE, Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> ESC OFF Switch >> Repair procedures >> Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Repair procedures: Inspection

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the crash pad lower panel.

    (Refer to "CRASH PAD ")

  3. Remove the crash pad side switch assembly (A).
    Fig 1: Removing Crash Pad Side Switch Assembly
    G10243439Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the ESC OFF switch connector (A).
    Fig 2: ESC OFF Switch Connector
    G10243440Courtesy of HYUNDAI MOTOR AMERICA
  5. Check the continuity between the switch terminals as the ESC OFF switch is engaged.
    Fig 3: Checking Continuity Between Switch Terminals
    G10243441Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals