LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2013 >> Genesis Coupe 2.0T, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Inspection >> Throttle Position Sensor (TPS)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Position Sensor (TPS)

  1. Connect a scantool on the Data Link Connector (DLC).
  2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T.
    THROTTLE ANGLE AND OUTPUT VOLTAGE CHART

    Throttle Angle Output Voltage (V)
    TPS 1 TPS 2
    C.T. 0.25 ~ 0.9 Min.4.0
    W.O.T. Min.4.0 0.25 ~ 0.9
  3. Turn the ignition switch OFF and disconnect the scantool from the DLC.
  4. Disconnect the ETC module connector and measure the resistance between the ETC module terminals 1 and 2.

    Specification:  Refer to "SPECIFICATION "

scientia non olet · About LEMON Manuals