LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2013 >> Genesis Coupe 2.0T, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Electric WGT Control Actuator >> Repair Procedures >> Inspection >> Position Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Position Sensor

  1. Turn ignition switch ON.
  2. Connect the GDS to the data link connector (DLC).
  3. Check the output voltage at each position of the EWGA position sensor on current data item is within specification.

    Specification:  Refer to "SPECIFICATION "

scientia non olet · About LEMON Manuals