LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2013 >> Genesis Coupe 3.8 Track, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.8L >> Fuel Tank Pressure Sensor (FTPS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the floor mat in the trunk (Refer to Trunk Trim ).
  3. Remove the service cover (A).
    Fig 1: Identifying Service Cover
    G00540471Courtesy of HYUNDAI MOTOR CO.
  4. Disconnect the fuel tank pressure sensor connector (A).
  5. Remove the fuel tank pressure sensor after removing the installation bolt.
    Fig 2: Identifying Fuel Tank Pressure Sensor Connector
    G00540472Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals