LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2013 >> Santa Fe GLS, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Assembly >> Front Wheel Transfer Assembly >> Repair Procedures >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Installation

  1. Install in the reverse order of removal.
    NOTE:
    1. Be careful not to damage the O-ring (A). If the O-ring is damaged, replace with a new one.
    2. Smear and cover splines (B) with molybdenum type high pressure grease.

      TECHLUBE MEGAMAX - ALPHA OR EQUIVALENT

      Fig 1: Identifying O-Ring And Cover Splines
      G09267674Courtesy of HYUNDAI MOTOR AMERICA
    3. Install the propeller shaft to be near runout marking (Transfer assembly 1ea, propeller shaft 1ea) each other.
      Fig 2: Identifying Runout Marking
      G09267675Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals