LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Accent SE, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Button Engine Start System) >> Start Stop Button >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different car, the 2014 Hyundai Santa Fe Sport and 2013 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver crash pad lower panel.

    Refer to CRASH PAD LOWER PANEL .

  3. Disconnect the start/stop button connector (B) after removing the center fascia garnish (A).
    Fig 1: Identifying Start/Stop Button Connector And Center Fascia Garnish
    G09366634Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the start/stop button (A) after removing the screws (3EA).
Fig 2: Identifying Start/Stop Button
G09366635Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals