LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Elantra SE, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transaxle System) >> Manual Transaxle System >> Neutral Switch >> Repair Procedures >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Remove the air cleaner assembly. (Refer to REMOVAL AND INSTALLATION )
  2. Disconnect the neutral position switch connector (A).
    3. Fig 1: Neutral Position Switch & Connector
    G00558268Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the neutral position switch.
  4. Replace a new one and install the neutral position switch, then connect the connector.

    5. Specification: 

    29.4 ~ 34.3 N.m (3.0 ~ 3.5 kgf.m, 21.7 ~ 25.3 lb-ft)

scientia non olet · About LEMON Manuals