LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Elantra SE, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> ETC (Electronic Throttle Control) System >> Repair procedures >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose (Refer to resonator and the air intake hose in "ENGINE AND TRANSAXLE ASSEMBLY " ).
  3. Disconnect the ETC module connector (A).
    Fig 1: ETC Module Connector
    G10234856Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the coolant hoses (B).
  5. Remove the installation bolts (C), and then remove the ETC module from the engine.
    Fig 2: Coolant Hoses And Installation Bolts
    G10234857Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals