System operation Spec - Front sensor

When the system has the power (after IGN ON and D gear), MICOM checks every sensor channel. In case it is not find any error, it sounds 500ms afterward. But it finds any error even a sensor, it sounds buzzer corresponding fault sensor instead of initial starting alarm. If PAS ON switch in OFF, system doesn't work. Function for normal mode entrance is as below.

Fig 1: RPAS Alarm System Operation Diagram (Front)

Courtesy of HYUNDAI MOTOR AMERICA

* In the initial mode, IPM (BCM) judges only sensor fail.

With D gear, system function is as below.

Fig 2: RPAS Alarm System Operation Diagram (With D Gear)

Courtesy of HYUNDAI MOTOR AMERICA

With D gear releasing, system function is as below

Fig 3: RPAS Alarm System Operation Diagram (With D Gear Releasing)

Courtesy of HYUNDAI MOTOR AMERICA