Variant Coding Procedure

On-line type on GDS
1. Turn the ignition switch OFF.
2. Connect the GDS.
3. Turn the ignition switch ON without the engine running.
4. Select vehicle name and airbag system.
5. Select variant coding mode.
6. Follow the steps on the screen below.
  1. Initial ACU Variant Coding screen
    
    Fig 1: Initializing ACU Variant Coding Screen
    Courtesy of HYUNDAI MOTOR AMERICA
  2. VIN Code entering screen
    
    Fig 2: Display - VIN Code Entering Screen
    Courtesy of HYUNDAI MOTOR AMERICA
  3. Variant Coding's proceeding screen-1
    
    Fig 3: Display - Variant Coding Proceeding Screen-1
    Courtesy of HYUNDAI MOTOR AMERICA
  4. Variant Coding's proceeding screen-2
    
    Fig 4: Display - Variant Coding Proceeding Screen-2
    Courtesy of HYUNDAI MOTOR AMERICA
  5. Variant Coding is completed
    
    Fig 5: Display - Variant Coding Completion Screen
    Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    This screen is shown when you try variant coding on the SRSCM which has been performed before.
    
    Fig 6: Display - ACU Coding Completion Screen
    Courtesy of HYUNDAI MOTOR AMERICA
    
    This screen is shown when communication failure has occurred.
    
    Fig 7: Display - Communication Failure Screen
    Courtesy of HYUNDAI MOTOR AMERICA
Off-line type on GDS (Use when not connected to the internet)
1. Turn the ignition switch OFF.
2. Connect the GDS.
3. Turn the ignition switch ON without the engine running.
4. Select vehicle name and airbag system.
5. Select variant coding mode.
6. Follow the steps on the screen below.
  1. Initial ACU Variant Coding screen
    
    Fig 8: Initializing ACU Variant Coding Screen
    Courtesy of HYUNDAI MOTOR AMERICA
  2. ACU Coding Code entering screen
    
    Fig 9: Display - ACU Coding Code Entering Screen
    Courtesy of HYUNDAI MOTOR AMERICA
  3. Rechecking ACU Coding Code entering screen
    
    Fig 10: Display - ACU Coding Code Rechecking Entering Screen
    Courtesy of HYUNDAI MOTOR AMERICA
  4. Variant Coding's proceeding screen-1
    
    Fig 11: Display - Variant Coding Proceeding Screen-1
    Courtesy of HYUNDAI MOTOR AMERICA
  5. Variant Coding's proceeding screen-2
    
    Fig 12: Display - Variant Coding Proceeding Screen-2
    Courtesy of HYUNDAI MOTOR AMERICA
  6. Variant Coding is completed
    
    Fig 13: Display - Variant Coding Completion Screen
    Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    This screen is shown when you try variant coding on the SRSCM which has been performed before.
    
    Fig 14: Display - ACU Coding Completion Screen
    Courtesy of HYUNDAI MOTOR AMERICA