Special Tools
WARNING: This page is about a different car, the 2014 Mitsubishi Mirage. However, it is still accessible from the selected car via links, so may be relevant.
| Tool | Tool number and name | Supersession | Application |
|---|---|---|---|
| MB991883 Flywheel stopper |
General service tool | Supporting the flywheel < M/T > or drive plate < CVT > | |
| MB992106 O-ring installer |
- | Installation of O-ring on fuel injector injection nozzle side | |
| MB991953 Oxygen sensor wrench |
MB991953-01 | Removal and installation of linear air-fuel ratio sensor | |
| MB991396 Oil filter wrench |
General service tool or MB991396-01 | Removal and installation of oil filter | |
| MB991828 Oil filter wrench |
General service tool | ||
| MD998727 Oil pan FIPG cutter |
MD998727-01 | Removal of oil pan | |
| MB990699 Differential oil seal installer |
- | Installation of front oil seal | |
| MB991993 Crankshaft front oil seal guide |
- | Installation of timing chain case | |
| MB992676 Oil filter stud setter |
- | Installation of oil filter stud | |
| MB992000 Crankshaft adapter |
- | Turn the crankshaft | |
| MD999597 Valve spring compressor |
- | Compression of valve spring | |
| MB992085 Valve stem seal pliers |
- | Valve stem seal removal | |
| MB992922 Valve stem seal installer adjustable |
- | Valve stem seal press-fitting | |
| MD998780 Piston pin setting tool |
MIT216941 | Removal and press-fitting of piston pin | |
| MB991659 Guide D |
- | ||
| MB991614 Angle gauge |
General service tool | Tightening crankshaft bearing cap bolt |