Section 22 (Controller Area Network (Can))
WARNING: This page is about a different car, the 2014 Mitsubishi Mirage. However, it is still accessible from the selected car via links, so may be relevant.
- Special Tools
- Test Equipment
- Service Precautions
- Precautions On How To Repair The Can Bus Lines
- Explanation About The Scan Tool (M.U.T.-III) Can Bus Diagnostics
- Diagnostic Trouble Code Diagnosis
- Diagnosis
- Can Bus Diagnostics Table
- Can-Related Connector Position
- Can Bus Diagnostics
- Diagnostic Item 1: Communication with no ECUs is possible
- Diagnostic Item 2: Diagnose shorts in the power supply to CAN bus line
- Diagnostic Item 3: Diagnose shorts in the ground to CAN bus line
- Diagnostic Item 4: Diagnose shorts between CAN_H and L lines
- Diagnostic Item 5: Diagnose when the scan tool cannot receive the data sent by ETACS-ECU
- Diagnostic Item 6: Diagnose when the scan tool cannot receive the data sent by combination meter
- Diagnostic Item 7: Diagnose when the scan tool cannot receive the data sent by SRS-ECU
- Diagnostic Item 8: Diagnose when the scan tool cannot receive the data sent by KOS-ECU. < Vehicles with KOS >
- Diagnostic Item 9: Diagnose when the scan tool cannot receive the data sent by auto A/C controller assembly (A/C-ECU). < Vehicles with automatic A/C >
- Diagnostic Item 10: Diagnose when the scan tool cannot receive the data sent by OSS-ECU. < Vehicles with KOS >
- Diagnostic Item 11: Diagnose when the scan tool cannot receive the data sent by steering wheel sensor
- Diagnostic Item 12: Diagnose when the scan tool cannot receive the data sent by occupant classification-ECU
- Diagnostic Item 13: Diagnose the lines between the joint connectors (CAN1 and CAN2)
- Diagnostic Item 14: Diagnose when the scan tool cannot receive the data sent by EPS-ECU
- Diagnostic Item 15: Diagnose when the scan tool cannot receive the data sent by ASC-ECU
- Diagnostic Item 16: Diagnose when the scan tool cannot receive the data sent by transaxle control module (ECM). < CVT >
- Diagnostic Item 17: Diagnose when the scan tool (M.U.T.-III) cannot receive the data sent by engine control module (ECM)
- Diagnostics Trouble Code Reference Table