LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Equus Ultimate >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Front Axle) >> Special Tools
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Special Tools

WARNING: This page is about a different car, the 2014 Mitsubishi Mirage. However, it is still accessible from the selected car via links, so may be relevant.
Tool Tool number and name Supersession Application
G09631522
MB991618
Hub bolt remover
General service tool Removal of the hub bolt
G09631523
MB990767
Front hub and flange yoke holder
MB990767-01 Fixing of the hub
G09631524
MB992700
Lock nut chisel
General service tool Raising up the swaged part driveshaft nut
G09631525
MB991897 or MB992011
Ball joint remover
MB991113-01, MB990635-01 or General service tool Knuckle and tie-rod end ball joint disconnection
NOTE: Steering linkage puller (MB990635 or MB991113) is also used to disconnect knuckle and tie-rod end ball joint.
G09631526
MB990241
Axle shaft puller
  1. MB990242 Puller shaft
  2. MB990244 Puller bar
MB990241-01 or General service tool Removal of the driveshaft
G09631527
MB991056 or MB991355
Knuckle arm bridge
MB991056-01
  • Removal of the hub
  • Removal of the wheel bearing
G09631528
MB992250
Knuckle arm bridge attachment
-
G09631529
  1. MB991017

    Front hub remover and installer

  2. MB991019

Spacer
MB990998-01
  • Removal of hub
  • Measurement of wheel bearing rotation starting torque
  • Measurement of wheel bearing axial looseness
  • Removal of the wheel bearing inner race (outside)
NOTE: MB991019, which belongs to MB991017, should be used as a spacer.
G09631530
MB992867
Front hub removal and installer spacer
- Removal of hub
Measurement of Wheel bearing rotation starting torque
G09631531
MD998801
Remover
- Removal of the wheel bearing inner race (outside)
G09631532
MB992254
Base
- Removal of wheel bearing outer race
G09631533
MD999547
Oil seal installer
- Removal of wheel bearing outer race
G09631534
MB990800
Ball joint B remover and installer
- Hub press-fitting
G09631535
MB990799
Ball joint A remover and installer
- Press-fitting of wheel bearing
G09631536
MD998812
Installer cap
- Press-fitting of wheel bearing
G09631537
MD998813
Installer
-
G09631538
MD998815
Installer adapter
-
G09631539
MB991000
Spacer
-
  • Measurement of wheel bearing rotation starting torque
  • Measurement of wheel bearing axial looseness
G09631540
MB991199
Oil seal installer
- Press-fitting of hub
G09631541
MB990685
Torque wrench
General service tool Measurement of wheel bearing starting torque
G09631542
MB990326
Preload socket
General service tool
G09631543
MB991561
Boot band crimping tool
MB991561 EBJ boot (resin boot) band installation