LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Genesis 5.0 R-Spec >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission Control System - 5.0L >> Transaxle Control Module (TCM) >> Repair Procedures >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Installation

  1. Installation is reverse of removal.
    CAUTION:
    1. In the case of the vehicle equipped with immobilizer or button engine start system, perform "TEACHING PROCEDURES ". (Refer to "IMMOBILIZER SYSTEM " or "SMART KEY SYSTEM " ).
    2. After exchanging TCM, input the EOL (End of line).

      (Refer to "REPAIR PROCEDURES " ).

    3. When replacing the TCM, reset the automatic transmissions values by using the GDS.
    4. Perform TCM LEARNING  after replacing the TCM.
      Fig 1: Display - Reset Automatic Transmissions Values
      G08819321Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals