Repair Procedures: Removal

Remove the following items;
1. Sub frame assembly
  (Refer to FRONT CROSSMEMBER )
2. Driveshaft assembly.
  (Refer to REPAIR PROCEDURES )
Remove the propeller shaft (A).
Tightening torque:

49.0~68.6 N.m (5.0~7.0 kgf.m, 36.2~50.6 lb-ft)

Fig 1: Identifying Propeller Shaft
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the transfer upper & lower mounting bolts. (transfer side → transaxle side)

Fig 2: Identifying Transfer Upper Mounting Bolts
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Identifying Transfer Lower Mounting Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the transfer lower mounting bolt. (transaxle side → transfer side)

Fig 4: Identifying Transfer Lower Mounting Bolt
Courtesy of HYUNDAI MOTOR AMERICA