LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Veloster Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> ESC Control Module >> Repair Procedures >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Installation

  1. Installation is the reverse of removal.
  2. Tighten the HECU mounting bolts and nuts to the specified torque.
  3. After installation, bleed the brake system.

    (Refer to ABS bleeding)

    NOTE: In a case of replacing ESC HECU, operate following functions.
    1. "Steering Angle Sensor Calibration" for steering angle sensor offset correction.

      (Refer to the ASP CALIBRATION .

    2. "Longitudinal Sensor Calibration" for Longitudinal sensor offset correction.

      (Refer to the "YAW-RATE AND G SENSOR ")

scientia non olet · About LEMON Manuals