| DTC Strategy |
|
- Poor connection
- Open or short power/ground in signal circuit
- S1
|
| Case1 |
Enable Conditions |
- S1 sensor voltage is between 1.49V and 1.5V
|
| Threshold Value |
- Deviation of average correction value of fuel ratio is higher than 0.1
|
| Diagnostic Time |
|
| Case2 |
Enable Conditions |
- Fuel cut condition is higher than 3 sec.
|
| Threshold Value |
- S1 sensor voltage is lower than 1.7V
|
| Diagnostic Time |
|
| Case3 |
Enable Conditions |
- Target value of fuel ratio is lower than 0.97
- S1 sensor voltage is between 1.49V and 1.5V
|
| Threshold Value |
- Integrated air mass is higher than 0.2kg
|
| Threshold Value |
|
| MIL ON Condition |
|