Control Circuit Inspection

■ Check short to battery in harness 

1. IG "OFF" & Disconnect OCV connector.
2. Measure resistance between power and control terminals of OCV harness connector.

   Specification:  Infinite

   Fig 1: Measuring Resistance Between Power And Control Terminals Of OCV Harness Connector

   Courtesy of HYUNDAI MOTOR AMERICA
3. Is the measured resistance within specification?

   YES 

   • Go to "COMPONENT INSPECTION " procedure.

   NO 

   • Repair short to battery in OCV control circuit and go to "VERIFICATION OF VEHICLE REPAIR " procedure.