Repair Procedures: Removal

Remove the floor Interior console assembly.
(Refer to: Body - "FLOOR CONSOLE ").
Remove the air duct (A).

Fig 1: Identifying Air Duct
Courtesy of HYUNDAI MOTOR AMERICA
Remove the cover (A).

Fig 2: Removing Cover
Courtesy of HYUNDAI MOTOR AMERICA
Remove the select cable (B) by removing the snap pin (A).

Fig 3: Removing Snap Pin
Courtesy of HYUNDAI MOTOR AMERICA
Remove the shift cable (B) after removing the clip (A).

Fig 4: Removing Shift Cable
Courtesy of HYUNDAI MOTOR AMERICA
Remove the cable guide (A) from lever assembly after pulling in the direction of the marker.

Fig 5: Removing Cable Guide From Lever Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Remove the shift lever assembly (B) by removing the bolts (A-4EA).
Tightening Torque:

8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Fig 6: Removing Shift Lever Assembly Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Remove the boots (A) and knob (B) from the lever assembly.
NOTE:
- Rotating counter-clockwise shift lever knob (B).
Fig 7: Rotating Counter-Clockwise Shift Lever Boots And Knob
Courtesy of HYUNDAI MOTOR AMERICA

Fig 8: Removing Lever Assembly
Courtesy of HYUNDAI MOTOR AMERICA