System Components

Fig 1: Power Trunk Lid (PTL) Drive Unit

Courtesy of HYUNDAI MOTOR AMERICA

Power trunk lid drive unit consists of motor & driven gear, PTL module, PTL motor and drive arm.

PTL drive unit is located in rear left trunk trim. PTL drive unit opens and closes the trunk connected push rod automatically.

Fig 2: Power Latch

Courtesy of HYUNDAI MOTOR AMERICA

Trunk opened by actuator after releases of latch's lock.

Built in the Micro switch for monitoring the latch lock & unlock status.

Fig 3: Power Striker

Courtesy of HYUNDAI MOTOR AMERICA

By using actuator cinching the striker to go down strongly when the trunk is closed by motor.

Built in the micro switch for monitoring the striker's position.

Fig 4: SMK (Smart Key)

Courtesy of HYUNDAI MOTOR AMERICA

Push the power trunk lid open of the SMK more than 0.1s to open the power trunk. Power Open operation shall be reversed when an additional Open/Close signal is received during power opening.