Current data Analysis
- IG key "ON".
- Perform "Current Data" procedure in the "Vehicle S/W Management" with GDS.
- Slide the seat all the way to forward and backward by operating "Driver slide switch".
- Monitor "Slide motor" and "Limit switch" related parameters in the "Current Data"
.
■ Reference data
Seat position Current Data Forward Max. Slide Forward Limit Switch OFF Slide Backward Limit Switch ON Slide Forward Motor Output ON Slide Backward Motor Output OFF Slide Position 2896 edge Backward Max. Slide Forward Limit Switch ON Slide Backward Limit Switch OFF Slide Forward Motor Output OFF Slide Backward Motor Output ON Slide Position 0 edge CAUTION: This current data is nothing but an example at certain condition. Thus, the real current data could be different form this example. - Is the displayed current data normal?
YES
- Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
- Repair as necessary, go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Check the seat movement restrain by obstacles.
- Check open/poor connection in the slide motor circuit.
- Check short to ground in the slide motor circuit.
- Go to "WIRING INSPECTION " procedure.