LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2015 >> Genesis Coupe 3.8, Automatic Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System >> Transaxle Control Module (TCM) >> Repair procedures >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Installation

  1. Installation is reverse of removal.
    CAUTION:
    • In the case of the vehicle equipped with immobilizer or button engine start system, perform "Key Teaching" procedure together. (Refer to "IMMOBILIZER SYSTEM " or "BUTTON ENGINE START SYSTEM " ).
    • After exchanging TCM, input the EOL (End of line).

      (Refer to "REPAIR PROCEDURES " )

    • When replacing the TCM, reset the automatic transmissions values by using the GDS.
    • Perform TCM learning after replacing the TCM.
      Fig 1: Screen Display - Reset Automatic Transmission Values
      G10480524Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals