LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2015 >> Tucson SE, FWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System - 2.4L >> Transaxle Oil Temperature Sensor >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Remove the air cleaner assembly and air duct.

    (Refer to: Engine Mechanical System - "AIR CLEANER ").

  2. Remove the battery and battery tray.

    (Refer to: Engine Electrical System - "BATTERY ").

  3. Remove the under cover.

    (Refer to: Engine Mechanical System - "ENGINE ROOM UNDER COVER ")

  4. Remove the valve body.

    (Refer to Hydraulic System - "VALVE BODY ").

  5. Disconnect the solenoid valve connector (A).
    Fig 1: Solenoid Valve Connector Location
    G10631725Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the solenoid valve main connector mounting clip (A) after removing the bolt.
    Fig 2: Solenoid Valve Main Connector Mounting Clip Location
    G10631726Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the solenoid valve main connector (A).
    Fig 3: Solenoid Valve Main Connector Location
    G10631727Courtesy of HYUNDAI MOTOR AMERICA
  8. Disconnect the input & output speed sensor connector (A) after press the lock from the solenoid valve main wiring.
    Fig 4: Input & Output Speed Sensor Connector Location
    G10631728Courtesy of HYUNDAI MOTOR AMERICA
  9. Remove the solenoid valve main wiring & oil temperature sensor after loosening the main connector bolt (A).
Fig 5: Main Connector Bolts Location
G10631729Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals