LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2015 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Dual Clutch Transmission Control System - 1.6L GDI >> DCT Control Module (TCM) >> Repair Procedures >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Replacement

  1. Turn off the Ignition Switch and then disconnect the Battery (-) Cable.
  2. Remove the Lower Cover on the Crash Pad.

    (Refer to: The INTERIOR (Crash Pad) of the BD procedure.)

  3. Disconnect the TCM Connector (A).
  4. Remove the Mounting Bolt and Nut. Then remove the TCM (B).

    TCM Mounting Bolt/Nut: 

    9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

    Fig 1: TCM Connector Location
    G10608130Courtesy of HYUNDAI MOTOR AMERICA
  5. Installation is the reverse of removal.