Repair Procedures: Removal
- Remove the Rear Wheel and Tire.
Tightening Torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
- Remove the Rear Wheel Speed Sensor Mounting Bolt (A).
Tightening Torque:
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.0 ~ 8.0 lb-ft)
- Remove the Rear Seat Back.
(Refer to: Body procedure - Seat)
- Remove the Rear Wheel Housing Trim.
(Refer to: Body procedure - INTERIOR TRIM ).
- Disconnect the Rear Wheel Speed Sensor Connector.
- Installation is the reverse of removal.