LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2015 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L GDI >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Removal >> [Bank 1/Intake]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

[Bank 1/Intake]

  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Disconnect the Camshaft Position Sensor Connector (A).
  3. Remove the Installation Bolt (B), and then remove the Sensor.
    Fig 1: Camshaft Position Sensor Connector And Installation Bolt (Bank 1/Intake)
    G10607938Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals