Shift Lever Assembly Replacement

Remove the Floor Interior Console Assembly.
(Refer to: "INTERIOR (Console)" in BD procedure)
Remove the Cover (A).

Fig 1: Floor Interior Console Assembly Cover
Courtesy of HYUNDAI MOTOR AMERICA
Remove the Select Cable (B) by removing the Snap Pin (A).

Fig 2: Select Cable And Snap Pin
Courtesy of HYUNDAI MOTOR AMERICA
Remove the Shift Lever Assembly (B) by removing the Bolts (A-4EA).
Tightening Torque:

9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 14.5 lb-ft)

Fig 3: Shift Lever Assembly And Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Remove the Shift Cable (B) by removing the Clip (A).

Fig 4: Shift Cable And Clip
Courtesy of HYUNDAI MOTOR AMERICA

Fig 5: Shift Lever Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.