Repair procedures: Installation

Fix the band cable of FEM joint connector (B) and connect the smart cruise control unit connector (A).

Fig 1: FEM Joint Connector Band Cable And Smart Cruise Control Unit Connector
Courtesy of HYUNDAI MOTOR AMERICA
Install the smart cruise control unit assembly (A) on the vehicle.
Tightening torque

Bolts:

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

Nuts:

6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

Fig 2: Smart Cruise Control Unit Assembly On Vehicle
Courtesy of HYUNDAI MOTOR AMERICA

CAUTION: When installing the sensor, align the direction of sensor with the vehicle motion vector and adjust the upside of sensor horizontally using level meter (A).

Fig 3: Level Meter
Courtesy of HYUNDAI MOTOR AMERICA
Align the smart cruise control sensor.
(Refer to "SMART CRUISE CONTROL (SCC) SENSOR ALIGNMENT ")
Install the bumper.
(Refer to "FRONT BUMPER COVER ")