Repair procedures: Replacement

CAUTION:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
Put on gloves to protect your hands.

Using a screwdriver or remover, remove the center fascia side garnish (A).

Fig 1: Center Fascia Side Garnish
Courtesy of HYUNDAI MOTOR AMERICA
Remove the gear boots (B) and gear knob (A).

Fig 2: Gear Boots And Knob
Courtesy of HYUNDAI MOTOR AMERICA
Using a screwdriver or remover, remove the console upper tray complete (A).

Fig 3: Console Upper Tray
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connectors (A).

Fig 4: Connectors
Courtesy of HYUNDAI MOTOR AMERICA
Remove the console tray (A).

Fig 5: Console Tray
Courtesy of HYUNDAI MOTOR AMERICA
Remove the console tray mat (A).

Fig 6: Console Tray Mat
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting screws and bolts, then remove the console rear complete assembly (A).

Fig 7: Console Rear Complete Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connector (A).

Fig 8: Connector
Courtesy of HYUNDAI MOTOR AMERICA
Using a screwdriver or remover, remove the console extension cover (A).

Fig 9: Console Extension Cover
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting screws, then remove the console front complete assembly (A).
NOTE:
- Shift lever to "N" position when remove the console front complete assembly.
Fig 10: Console Front Complete Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connectors (A).

Fig 11: Connectors
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.

NOTE: