Variant coding Procedure

On-Line type on GDS
1. With the ignition "OFF", connect GDS.
2. Ignition "ON" & Engine "OFF" select vehicle name and airbag system.
3. Select Variant coding mode.
4. Follow steps on the screen as follows.
  1. Initial ACU Variant Coding screen
    
    Fig 1: Display - Initial ACU Variant Coding screen
    Courtesy of HYUNDAI MOTOR AMERICA
  2. VIN Code entering screen
    
    Fig 2: Display - VIN Code Entering screen
    Courtesy of HYUNDAI MOTOR AMERICA
  3. Variant coding's proceeding screen-1
    
    Fig 3: Display - Variant Coding Proceeding Screen 1
    Courtesy of HYUNDAI MOTOR AMERICA
  4. Variant coding's proceeding screen-2
    
    Fig 4: Display - Variant Coding Proceeding Screen 2
    Courtesy of HYUNDAI MOTOR AMERICA
  5. Variant coding is completed
    
    Fig 5: Display - Variant Coding Completed Screen
    Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    This screen is opened when you try the variant coding again on the SRSCM that already has the variant coding performed.
    
    Fig 6: Display - ACU Coding Completed Screen
    Courtesy of HYUNDAI MOTOR AMERICA
    
    If communication fails, the following screen will appear.
    
    Fig 7: Display - Communication Failed Screen
    Courtesy of HYUNDAI MOTOR AMERICA