Armrest Replacement

CAUTION:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.

Using a screwdriver or remover, remove the rear console cover (A).

Fig 1: Rear Console Cover
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting screws, then remove the armrest assembly and armrest support bracket (A).

Fig 2: Armrest Assembly And Armrest Support Bracket With Mounting Screws
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting screws, then disconnect the armrest assembly (A) and armrest support bracket (B).

Fig 3: Armrest Assembly And Armrest Support Bracket With Mounting Screws
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.
NOTE:
- Replace any damaged clips.