LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Elantra Value Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Heater System) >> Mode Control Actuator >> Repair Procedures >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to: Body - "CRASH PAD LOWER PANEL ").

  3. Remove the knee airbag module.

    (Refer to: Restraint - "Knee Airbag (KAB) Module ").

  4. Remove the driver side shower duct (A) after loosening the screw.
    Fig 1: Loosening Driver Side Shower Duct Screw
    G10751935Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the brake pedal assembly.

    (Refer to: Brake System - "BRAKE PEDAL ").

  6. Disconnect the connector (A) and then remove the mode control actuator (B) after loosening the mounting screws.
    Fig 2: Connector And Mode Control Actuator Mounting Screws
    G10751936Courtesy of HYUNDAI MOTOR AMERICA
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals