Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative (-) battery terminal.
Remove the crash pad center garnish (A).

Fig 1: Identifying Crash Pad Center Garnish
Courtesy of HYUNDAI MOTOR AMERICA
Remove the crash pad lower panel (A).

Fig 2: Removing Crash Pad Lower Panel
Courtesy of HYUNDAI MOTOR AMERICA
Remove the steering column shroud lower and upper panel (A) after loosening 3 screws.

Fig 3: Loosening Steering Column Shroud Lower And Upper Panel Screws
Courtesy of HYUNDAI MOTOR AMERICA

Fig 4: Identifying Steering Column Shroud Lower And Upper Panel
Courtesy of HYUNDAI MOTOR AMERICA
Remove the driver crash pad panel (A).

Fig 5: Identifying Driver Crash Pad Panel
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the Start/Stop button connector (A).

Fig 6: Identifying Start/Stop Button Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the Start/Stop button (A) after pushing the hook (B).

Fig 7: Locating Start/Stop Button
Courtesy of HYUNDAI MOTOR AMERICA