LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Equus Signature >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System Diagnosis (3 Of 3) >> DTC U0105: Lost Communication With Fuel Injector Control Module >> Wiring Inspection >> CAN Communication Circuit Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

CAN Communication Circuit Inspection

  1. IG "OFF" and disconnect IDB connector and ECM connector.
  2. Check resistance between CAN-HIGH terminal of IDB Connector and CAN-HIGH terminal of harness connector. (Measurement "A")
  3. Check resistance between CAN-LOW terminal of IDB Connector and CAN-LOW terminal of harness connector. (Measurement "B")

    Specification:  below 1.0Ω

  4. Is the measured resistance within specification?

    YES 

    • Substitute with a known-good IDB and check for proper operation. If the problem is corrected, replace IDB and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

scientia non olet · About LEMON Manuals