LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Santa Fe Sport 2.0T, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the installation nuts (C), the bolt (B) and then remove the accelerator pedal module.
    Fig 1: Identifying APS Connector And Installation Nuts
    G10582793Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Identifying APS Bolt
    G10582794Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals