LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Santa Fe Sport Base, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.4L >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A).
    Fig 1: Identifying Crankshaft Position Sensor Connector
    G10587681Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the protector (A).
    Fig 2: Identifying Crankshaft Position Sensor Connector Protector
    G10587682Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the installation bolt (A), and then remove the crankshaft position sensor.
Fig 3: Identifying Crankshaft Position Sensor Installation Bolt
G10587683Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals