Repair procedures: Installation

Install in the reverse order of removal.
NOTE:
1. Be careful not to damage the O-ring (A). If the O-ring is damaged, replace with a new one.
2. Smear and cover splines (B) with molybdenum type high pressure grease.
  TECHLUBE MEGAMAX - ALPHA OR EQUIVALENT
  
  Fig 1: Identifying O-Ring And Splines
  Courtesy of HYUNDAI MOTOR AMERICA
3. Install the propeller shaft to be near runout marking (Transfer assembly 1ea, propeller shaft 1ea) each other.
  
  Fig 2: Installing Propeller Shaft
  Courtesy of HYUNDAI MOTOR AMERICA