Repair Procedures: Adjustment

Adjusting Method for T/M Control Cable 

1. Set room side Shift Lever and T/M side Manual Control Lever to "N" position.
2. Connect room side Shift Lever and Shift Cable.
3. Push cable to "F" direction displayed to eliminate FREE PLAY.
4. Tighten adjusting nut (A).

   Tightening Torque: 

   7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

   Fig 1: Tightening Adjusting Nut

   Courtesy of HYUNDAI MOTOR AMERICA
5. After adjusting according check to be sure that this part operates surely at each range of T/M side corresponding to each position of Shift Lever.