Repair Procedures: Removal

Remove the Floor Console.
(Refer to: Body-"FLOOR CONSOLE ").
Remove the air duct.
Disconnect the shift cable (A).

Fig 1: Removing Air Duct And Floor Console
Courtesy of HYUNDAI MOTOR AMERICA
Remove the retainers (A) and nut (B).
Tightening Torque:

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

Fig 2: Locating Retainers
Courtesy of HYUNDAI MOTOR AMERICA
Remove the nut (C) from the Manual Control Lever.
Tightening Torque:

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Remove the cable (B) from the bracket (A) at transaxle assembly side.
Remove the shift cable by pulling it toward the interior.

Fig 3: Removing Cable From Bracket Transaxle Assembly Side

Courtesy of HYUNDAI MOTOR AMERICA