Repair Procedures: Removal

Remove the Battery and the Battery Tray.
(Refer to: Engine Electrical System - "BATTERY ").
Remove the under cover (A).
Tightening Torque:

7.8 ~ 11.8N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

Fig 1: Locating Under Cover
Courtesy of HYUNDAI MOTOR AMERICA
Remove the drain plug (A) and reinstall the drain plug after draining ATF totally.
Drain Plug Tightening Torque:

38.2 ~ 48.1 N.m (3.9 ~ 4.9 kgf.m, 28.2 ~ 35.4 lb-ft)

Fig 2: Locating Drain Plug
Courtesy of HYUNDAI MOTOR AMERICA

CAUTION: Replace the gasket before reinstalling the drain plug.
Remove the wiring bracket installation bolt (A).

Fig 3: Wiring Bracket Installation Bolt
Courtesy of HYUNDAI MOTOR AMERICA
Remove the ATF Injection hole (eyebolt) (A).
Eyebolt Tightening Torque:

2.9 ~ 4.9 N.m (0.3 ~ 0.5 kgf.m, 2.2 ~ 3.6 lb-ft)

Fig 4: ATF Injection Hole Location
Courtesy of HYUNDAI MOTOR AMERICA

CAUTION: Replace the O-Ring (A) before reinstalling the eyebolt.

Fig 5: Locating O-Ring
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the coolant hose (B) after removing the coolant hose clamp (A).

Fig 6: Coolant Hose And Hose Clamps
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the hose (B) after removing the automatic transaxle fluid cooler hose clamp (A).

Fig 7: Locating Hose And Automatic Transaxle Fluid Cooler Hose Clamp
Courtesy of HYUNDAI MOTOR AMERICA

CAUTION:
When hose & pipe assembly

Align marking of pipe (B), marking of hose (A), and matching color to each other.

Fig 8: Aligning Marking Of Pipe (B), Marking Of Hose (A)
Courtesy of HYUNDAI MOTOR AMERICA
Remove the valve body cover (A).
Tightening Torque:

(A) 13.7 ~ 15.7N.m (1.4 ~ 1.6 kgf.m, 10.1 ~ 11.6lb-ft)

Fig 9: Valve Body Cover
Courtesy of HYUNDAI MOTOR AMERICA
CAUTION:
- Replace the gasket (A) before reinstalling the valve body cover.
Fig 10: Replacing Gasket
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the oil temperature sensor connector (A).

Fig 11: Oil Temperature Sensor Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the oil temperature sensor (A) after removing a bolt.
Tightening Torque:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

CAUTION: Be careful not to damage the harness lock connector.

Fig 12: Oil Temperature Sensor Location
Courtesy of HYUNDAI MOTOR AMERICA