Component Inspection
- Ignition "ON" & Engine "OFF" and using a GDS, clear the DTC.
- Ignition "OFF".
- Disconnect the battery (-) terminal cable from the battery and wait at least one minutes.
- Disconnect passenger side PODS-F ECU connector.
- Substitute the passenger side PODS-F ECU and check for proper operation.
- Does DTC present problem?
YES
- Substitute the passenger side PODS-F ECU main harness and check for proper operation.
If the problem is corrected, replace PODS-F ECU main harness then go to "VERIFICATION OF VEHICLE REPAIR " procedure then go to "PODS RESET " procedure.
NO
- Substitute a known-good passenger side PODS-F ECU and check for proper operation.
If the problem is corrected, replace passenger side PODS-F ECU then go to "VERIFICATION OF VEHICLE REPAIR " procedure then go to "PODS RESET " procedure.