Audio assembly Replacement

CAUTION:

A plastic trim tool is recommended, but if prying with a screwdriver, wrap it with protective tape and apply protective tape around the related parts to prevent damage.
Put on gloves to protect your hands.

Using a screwdriver or remover, remove the Center Facia Panel (A).

Fig 1: Locating Center Facia Panel
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the Heater Control Unit Connectors (A).

Fig 2: Heater Control Unit Connectors
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the Mounting Screws, remove the Audio Assembly (A).

Fig 3: Audio Assembly Mounting Screws
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the Audio Connectors (A).

Fig 4: Audio Connectors Location
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.
NOTE:
- Make sure the connectors are connected in properly.
- Replace any damaged clips.