Cluster Replacement

CAUTION:

A plastic trim tool is recommended, but if prying with a screwdriver, wrap it with protective tape and apply protective tape around the related parts to prevent damage.
Put on gloves to protect your hands.

Using a screwdriver or remover, remove the Cluster Fascia Lower Panel (A).

Fig 1: Cluster Fascia Lower Panel
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting screws, remove the Cluster Fascia Upper Panel (A).

Fig 2: Cluster Fascia Upper Panel Mounting Screws
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting screws, Remove The Cluster Assembly (A).

Fig 3: Cluster Assembly Mounting Screws
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the Connector (A).

Fig 4: Connector Location
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.
NOTE:
- Make sure the Connectors are connected in properly.
- Replace any damaged clips.