Shift Cable Replacement

Remove the floor Interior console assembly.
(Refer to "CONSOLE ")
Remove the select cable snap pin (A) and the clip (B) from the select cable assembly.

Courtesy of HYUNDAI MOTOR AMERICA

Courtesy of HYUNDAI MOTOR AMERICA
Remove the clip (A) from the shift cable assembly.
CAUTION: Set securely.

Fig 1: Locating Shift Cable Assembly Clip
Courtesy of HYUNDAI MOTOR AMERICA
Remove the retainer (A) and nuts (B-2ea).
Tightening torque:

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

Courtesy of HYUNDAI MOTOR AMERICA
Remove the pins (A).
Remove the cable (B) from the cable bracket at manual transaxle assembly side.
Remove the shift cable and select cable at cabin room.
CAUTION: Insert securely.
Marking must be shown after assembly.

Courtesy of HYUNDAI MOTOR AMERICA