LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Accent Value Edition >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transaxle System Diagnosis >> DTC P0706: Shift Cable Alignment Error Between TGS Lever And Transmission Range Sensor >> DTC Inspection >> Monitor GDS Data >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Monitor GDS Data: Notes

  1. Connect GDS to Data Link Connector(DLC).
  2. Ignition "ON" & engine "OFF".
  3. Select "Current Data" mode and monitor "Inhibitor switch" parameter.
  4. Change a shift lever from P-range to D-range.
  5. Is the Inhibitor switch value changed in specification?

    YES 

    • P0705 can be happened When Shift Cable alignment is not correct between TGS Lever and Transmission Range Sensor. so Do not replace "Inhibitor Switch" and Check the Alignment of Shift Cable.

    NO 

scientia non olet · About LEMON Manuals