LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Accent Value Edition >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Front Axle Assembly >> Front Hub/Knuckle >> Repair Procedures >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Disassembly

  1. Remove the snap ring (A).
    G12017804Courtesy of HYUNDAI MOTOR AMERICA
  2. Remove the hub assembly from the knuckle assembly.
    1. Install the front knuckle assembly (A) on press.
    2. Lay a suitable adapter (B) upon the hub assembly shaft.
    3. Remove the hub assembly (C) from the knuckle assembly (A) by using press.
    G12017805Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the hub bearing inner race from the hub assembly.
    1. Install a suitable tool (A) for removing the hub bearing inner race on the hub assembly.
    2. Lay the hub assembly and tool (A) upon a suitable adapter (B).
    3. Lay a suitable adapter (C) upon the hub assembly shaft.
    4. Remove the hub bearing inner race (D) from the hub assembly by using press.
    G12017806Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the dust cover (A).
    G12017807Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the hub bearing outer race from the knuckle assembly.
    1. Lay the hub assembly (A) upon a suitable adapter (B).
    2. Lay a suitable adapter (C) upon the hub bearing outer race.
    3. Remove the hub bearing outer race from the knuckle assembly by using press.
    G12017808Courtesy of HYUNDAI MOTOR AMERICA
  6. Replace hub bearing with a new one.
scientia non olet · About LEMON Manuals