LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Accent Value Edition >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Front Axle Assembly >> Front Hub/Knuckle >> Repair Procedures >> Reassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Reassembly

  1. Install the hub bearing to the knuckle assembly.
    1. Lay the knuckle assembly (A) on press.
    2. Lay a new hub bearing upon the knuckle assembly (A).
    3. Lay a suitable adapter (B) upon the hub bearing.
    4. Install the hub bearing to the knuckle assembly by using press.
    G12017809Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION:
    • Do not press against the inner race of the hub bearing because that can cause damage to the bearing assembly.
    • Always use a new wheel bearing assembly.
  2. Install the dust cover (A).
    G12017810Courtesy of HYUNDAI MOTOR AMERICA
  3. Install the hub assembly to the knuckle assembly.
    1. Lay the hub assembly (A) upon a suitable adapter (B).
    2. Lay the knuckle assembly (C) upon the hub assembly (A).
    3. Lay a suitable adapter (D) upon the hub bearing.
    4. Install the hub assembly (A) to the knuckle assembly (C) by using press.
    G12017811Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION: Do not press against the inner race of the hub bearing because that can cause damage to the bearing assembly.
  4. Install the snap ring (A).
    G12017812Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals