Injector Check
- IG KEY "OFF".
- Remove injectors.
- Check leakage or clog on injectors.
- Measure the resistance between power and control terminal of the injector. (Component side)
Specification:
COIL RESISTANCE SPECIFICATIONSCoil Resistance (Ω) Temp (°C) Temp (°F) 1.25 20 68 4
- Is the measured resistance within specification?
YES
- Go to "Fuel Line Check" procedure below.
NO
- Substitute with a known - good injector and check for proper operation. If the problem is corrected, replace injector and go to "Verification of Vehicle Repair " procedure.