Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.

Remove the driveshaft and axle.
(Refer to Driveshaft and axle - "FRONT DRIVESHAFT ")
Remove the propeller shaft (A).
Tightening torque:

49.0~68.6 N.m (5.0~7.0 kgf.m, 36.2~50.6 lb-ft)

Fig 1: Removing Propeller Shaft
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the transfer upper & lower mounting bolts. (transfer side → transaxle side)

Fig 2: Loosening Transfer Upper & Lower Mounting Bolts (1 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Loosening Transfer Upper & Lower Mounting Bolts (2 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the transfer lower mounting blot. (transaxle side → transfer side)

Fig 4: Loosening Transfer Lower Mounting Bolt
Courtesy of HYUNDAI MOTOR AMERICA